CARRO
Su cesta está vacía
Spinner
contact-phone
CALL CENTER
+44 2071 93 13 05

DM-6 and SM-AFRG4 and EGT Combo

Digital Gauge for AFRG4 & EGT

PLX Devices
Fabricante : PLX Devices
Número de Pieza : C6AFR4EGT
Barcode : 5210119002429
Disponibilidad : Disponible

The PLX Exhaust Gas Temperature Sensor Module accurately measures the exhaust gas temperature or cylinder head temperature of any internal combustion engine. Any K-Type thermocouple is compatible. Up to 32 Sensor Modules can be daisy chained together in the PLX iMFD system. This Sensor Module can also be used as a stand alone unit capable of interfacing with 3rd party hardware. The DM-6 Multi Gauge Display Module is an OLED automotive gauge designed to display the measured values from your PLX Sensor Modules. Measuring only 0.7 inches (18 mm) thin, it can be mounted virtually anywhere. The DM-6 Multi Gauge is designed to fit into most aftermarket 2 1/16 inches (52 mm) cups, and can be mounted for seamless integration into your vehicle. Utilizing new touch screen sense technology, buttons are a thing of the past. Navigate your gauge and menus with ease by touching the bezel of the gauge. An ideal accessory for your PLX Sensor Modules. Connect to a Multi Gauge with OBD II for even more information than any standard gauge. No warranty for the Lambda Sensor**

13.UPS
Official PLX Devices Distributor
Supplier Warranty
* Pida ahora su paquete saldrá de nuestro almacén en menos de 72 HORAS * Trazar su paquete en cualquier momento a través del número de seguimiento que le enviaremos a usted a través de SMS y correo electrónico

detalles del producto

Exhaust Gas Temperature Sensor Module


Vacuum and Boost Sensor Module

Included Items:

  • SM-EGT main unit
  • 1,2m (4ft) power wire with 2.1mm connector
  • 1,2m (4ft) Analog wires and connector with 4 terminals
  • 32cm (1ft) Serial Cable
  • Termination jumper
  • K-Type Thermocouple

Description:

The PLX Exhaust Gas Temperature Sensor Module accurately measures the exhaust gas temperature or cylinder head temperature of any internal combustion engine. Any K-Type thermocouple is compatible. Up to 32 Sensor Modules can be daisy chained together in the PLX iMFD system. This Sensor Module can also be used as a stand alone unit capable of interfacing with 3rd party hardware.

Physical Dimensions 2" x 2.875" x 1.125" (52mm x 75mm x 28mm) L x W x H
Accuracy ~5 Deg C (~9 Deg F)
Measurement Range 0-1023 Deg C (32-1873 Deg F)
Analog Outputs Linear 0-5V (Driving Current 20mA)
Operating Voltage 8V-18V
Power Consumption 0.3 Watts
Operating Temperature 0 - 85 Deg C
Sensors One K-Type Thermocouple
Enclosure Extruded Aluminum
 

0-5V analog linear output

SM-EGTVolts
 
DM-5 Vacuum Boost Gauge

DM-6 Touch Screen Multi Gauge The DM-6 Multi Gauge Display Module is an OLED automotive gauge designed to display the measured values from your PLX Sensor Modules. Measuring only 0.7" (18 mm) thin, it can be mounted virtually anywhere. The DM-6 Multi Gauge is designed to fit into most aftermarket 2 1/16" (52 mm) cups, and can be mounted for seamless integration into your vehicle. Utilizing new touch screen sense technology, buttons are a thing of the past. Navigate your gauge and menus with ease by touching the bezel of the gauge. An ideal accessory for your PLX Sensor Modules. Connect to a Multi Gauge with OBD II for even more information than any standard gauge.

 

Tech Specs

Physical Dimensions: Standard 2 1/16 x 0.7" (52 X 18 mm)
Display Technology: 1.10" OLED Screen (124 x 36 pixels)
LED (16 Green, Yellow, Red)
Viewing Angle: 180 Degrees
Polarization: None
Supply Voltage: 3.3V and 8V from SM Module
Power Consumption: < 1 Watt
Cable Length: 6' Power, 6" Serial
Operating Temp: 0 - 85 Degrees Celsius
Human Interface: 3 Button Capacitive Touch
Number of Sensors: 16 Maximum Daisy Chain
Supported Units: US Standard, Metric
 

Included Items

> DM-6 2 1/16" (52 mm) Gauge

> 4 Pin connector for SM-AFR connectivity

> 2 Terminals for 4 pin Connector

> 3.5 mm Y Splitter

> 6" M/F Extension Serial Cable

 

plxdevices_imfd

 

iMFD Stands for intelligent multi-functional display. It is the PLX standard for connecting everything in a daisy-chain.

Any product labeled withiMFD Logo Small are fully compatible with each other.

 

Sensor Modules (SM)

Up to 32 sensor modules can be connected in any combination

 
iMFD Sensor Modules

To Display Modules or Data Logger

 

Display Modules (DM)

Up to 32 display modules can be connected in any combination

From Sensor Modules or Data Logger Output
iMFD Display Modules - Multi-Gauges and Single Gauges
 

Simple Setup

The simple setup connects to just one SM module. This is great for stand alone gauges.Looking at the above diagram.

iMFD Display Modules
 

PLX Display Modules are also compatible with the PLX iMFD serial stream.

 

Data Logging

Two Options for datalogging are available. iMFD Data Logger and the iMFD Serial USB Adapter.

iMFD Data Logger iMFD Serial to USB Adapter
From Sensor Modules iMFD Data Logger - Data Log in real time or save and export for later use To Display Module From Sensor Modules iMFD SM to USB Adapter To Display Modules  
USB to PC High Speed download from flash Real-time   arrow USB to PC Real-time only
 

Descargas de productos

Productos relacionados

CONTACTO
+44 2071 93 13 05
Call Center
TPL Contact Email
Email Message
HORAS LABORALES
Lunes - Viernes 9:00 - 20:00
Sabado - Domingo Cerrado
W3C HTML5 validator