DM-6 Touch Screen Multi Gauge The DM-6 Multi Gauge Display Module is an OLED automotive gauge designed to display the measured values from your PLX Sensor Modules. Measuring only 0.7" (18 mm) thin, it can be mounted virtually anywhere. The DM-6 Multi Gauge is designed to fit into most aftermarket 2 1/16" (52 mm) cups, and can be mounted for seamless integration into your vehicle. Utilizing new touch screen sense technology, buttons are a thing of the past. Navigate your gauge and menus with ease by touching the bezel of the gauge. An ideal accessory for your PLX Sensor Modules. Connect to a Multi Gauge with OBD II for even more information than any standard gauge.
Tech Specs
| Physical Dimensions: | Standard 2 1/16 x 0.7" (52 X 18 mm) |
| Display Technology: | 1.10" OLED Screen (124 x 36 pixels) LED (16 Green, Yellow, Red) |
| Viewing Angle: | 180 Degrees |
| Polarization: | None |
| Supply Voltage: | 3.3V and 8V from SM Module |
| Power Consumption: | < 1 Watt |
| Cable Length: | 6' Power, 6" Serial |
| Operating Temp: | 0 - 85 Degrees Celsius |
| Human Interface: | 3 Button Capacitive Touch |
| Number of Sensors: | 16 Maximum Daisy Chain |
| Supported Units: | US Standard, Metric |
Included Items
> DM-6 2 1/16" (52 mm) Gauge
> 4 Pin connector for SM-AFR connectivity
> 2 Terminals for 4 pin Connector
> 3.5 mm Y Splitter
> 6" M/F Extension Serial Cable
iMFD Stands for intelligent multi-functional display. It is the PLX standard for connecting everything in a daisy-chain.
Any product labeled with
are fully compatible with each other.
Sensor Modules (SM)
Up to 32 sensor modules can be connected in any combination
To Display Modules or Data Logger
Display Modules (DM)
Up to 32 display modules can be connected in any combination
Simple Setup
The simple setup connects to just one SM module. This is great for stand alone gauges.Looking at the above diagram.
PLX Display Modules are also compatible with the PLX iMFD serial stream.
Data Logging
Two Options for datalogging are available. iMFD Data Logger and the iMFD Serial USB Adapter.
| iMFD Data Logger | iMFD Serial to USB Adapter | |||||
| From Sensor Modules |  | To Display Module | From Sensor Modules |  | To Display Modules | |
| USB to PC High Speed download from flash Real-time |  | USB to PC Real-time only | ||||
Boost / Vacuum Sensor Module
Included Items:
- SM-Vac/Boost main unit
- 1,2m (4ft) power wire with 2.1mm connector
- 1,2m (4ft) Analog wires and connector with 4 terminals
- 32cm (1ft) Serial Cable
- Termination jumper
- Pressure sensor is built-in
Description:
The PLX Vacuum/Boost Sensor Module accurately measures the vacuum pressure and boost pressure of any intake manifold. This is ideal for turbo and supercharged applications where monitoring the intake pressure is vital. Up to 32 Sensor Modules can be daisy chained together in the PLX iMFD system. The Vacuum/Boost Sensor Module can also be used as a stand alone unit capable of interfacing with 3rd party hardware.
| Physical Dimensions | 2" x 2.875" x 1.125" (52mm x 75mm x 28mm) L x W x H |
| Accuracy | < 0.25 PSI |
| Measurement Range | 30.5inHg - 30 PSI (760mmHg - 2.11kg/cm?2) |
| Analog Outputs | Linear 0-5V (Driving Current 20mA) |
| Operating Voltage | 8V-18V |
| Power Consumption | 0.3 Watts |
| Operating Temperature | 0 - 85 Deg C |
| Sensors | 3 Bar MAP sensor |
| Enclosure | Extruded Aluminum |
Technical Specifications:
Vacuum Range: (0V = 30.5inHg = -15PSI, 1.66V = 0PSI)
Boost Range: (1.66V = 0PSI, 5.0V = 30PSI)
0-5V analog linear output
